Bed Width 600mm Workpiece Weight 4 Tons Heavy Duty Lathe

Features of this heavy duty lathe:

The large horizontal lathe has the following technical characteristics: firstly, the basic components such as the bed, spindle, tailstock sleeve, etc. have been optimized and finely processed, with high precision and service life; Secondly, key components such as spindle bearings and major electrical components are selected from well-known domestic and foreign brands, which have excellent reliability and applicability; Thirdly, the machine tool has a good appearance and easy operation.

This series of machine tools can undertake various turning tasks. It can turn the formed surfaces of various parts such as outer circles, inner holes, end faces, metric threads, imperial threads, modular threads, and radial pitch threads. The upper tool holder can be used alone to turn short taper angles (cone generatrix length L ≤ 300 mm), and the upper tool holder can be used in conjunction with longitudinal feed to cut long taper angles. It can also meet the process requirements of drilling, boring, nesting, etc. It is also suitable for strong turning of hard alloy tools to process various black and non-ferrous metals.

Technical Specification:

SWING OVER BED: 1,000 mm

MAX. SWING OVER CARRIAGE: 720 mm

MAX. SWING OVER GAP: 1,350 mm

GAP WIDTH FROM CHUCK: 470 mm

DISTANCE BETWEEN CENTERS: 4,000 mm

MAX LENGTH TO BE CUT: 3,800 mm

MAX. BEDWAYS WIDTH: 600 mm

MAX. SUPPORTING CAPACITY OF CENTERS: 4,000 KGS

SPINDLE NOSE: ISO A2-11

SPINDLE BORE: 100 mm

SPINDLE SPEED: 5 TO 630 RPM, 4 STEPS

NUMBER OF FEEDS AND RANGE: 64

LONGITUDINAL: 0.08 TO 9.6 mm

CROSS SLIDE: 0.04 TO 4.8 mm

COMPOUND SLIDE: 0.02 TO 2.4 mm

NO. & RANGE OF METRIC THREADS: 56 KINDS, 1 TO 120 mm

NO. & RANGE OF INCH THREADS: 56 KINDS, 30 TO 1 / 4 T.P.I.

NO. & RANGE OF MODULE THREADS: 56 KINDS, 0.5 TO 60

NO. & RANGE OF DIAMETRIC PITCHS: 56 KINDS, 60 TO 0.5

MAX. TRAVEL OF CROSS SLIDE: 600 mm

TOOL POST: 4 POSITION, 32*32MM(1.3*1.3INCH)

MAX. TRAVEL OF TOOL POST: 250 mm

Dia. of tailstock sleeve: 120 mm

TAPER OF TAILSTOCK SLEEVE: MORSE NO. 6

TRAVEL OF TAILSTOCK SLEEVE: 250 mm

POWER OF MAIN MOTOR WITH INVERTER DEVICE: 18.5 KW

Power of rapid motor: 1.5 KW

Power of pump motor: 0.55 KW

Power of cooling motor: 0.15 KW

NETT DIMENSION OF THE MACHINE:6,150×1,600×16,00 mm

PACKING DIMENSION OF THE MACHINE: 6,500×1,900×1,950 mm

Standard accessories:

4 JAW CHUCK, DIA. OF 800 mm, 1 SET

STEADY REST, RANGE 40 TO 470 mm, 1 SET

FOLLOW REST, RANGE 30 TO 120 mm, 1 SET

DEAD CENTER, 2 PCS

REDUCING SLEEVE, 1 PC

LIVING CENTER, 1 SET

COOLING SYSTEM

WORK LIGHT

FOUNDATION BOLTS

SPECIAL TOOLS

OPERATION MANUAL